- 1- Ref#90020326K0709 IP Kamera 9070IR-PoE User Manual Release Date: 06/20/2011 Firmware Version: V1.2.1.9
- 10- Ref#90020326K0709 3.) Download the following software and save them to the appropriate locations. a. IP Edit - Device search tool whic
- 11- Ref#90020326K0709 If no DHCP server is available you must manually set the IP address to match your networks settings. Please see the custo
- 12- Ref#90020326K0709 2.) To setup the device, you will need type in the correct Gateway and IP Address. The Gateway Address: The gateway a
- 13- Ref#90020326K0709 4.) Then hit the rescan button on IP Edit to confirm the changes have been made.
- 14- Ref#90020326K0709 IP Service Using IP Service How to use IP Service on IP Edit: IP service allows the user to directly connect to his / her
- 15- Ref#90020326K0709 2.) IP Service through Google cloud Note: Make sure that the enable IP Service feature is turned on under the network set
- 16- Ref#90020326K0709 Searching with IP Service (Google Cloud): To use IP Service (Cloud): 1.) Click on the image and you will be taken to the
- 17- Ref#90020326K0709 5.) Accessing the device on the Internet (Port Forwarding Router / Firewall Setup Using a Router/Firewall to connect each
- 18- Ref#90020326K0709 Static IP Setup Static IP Address provided by the ISP. In this case, the 9070IR-PoE is being connected to the internet
- 19- Ref#90020326K0709 2.) Right click on yellow bar and install the activeX controls. 3.) Then click the install button and install the
- 2- Ref#90020326K0709 Warning: Any changes made to this equipment without permission may cause damages to the device! IMPORTANT NOTICE 1. IP K
- 20- Ref#90020326K0709 Note: If no active x controls are showing up, please go to internet explorer and enable activeX controls.
- 21- Ref#90020326K0709 The Control Console The IP Kamera 9070IR-PoE Control Console starts in the Section of the webpage. In this section na
- 22- Ref#90020326K0709 Media Player: The Media player can directly access the files in the built in memory. Each video file & picture c
- 23- Ref#90020326K0709 Motion Detection Motion Detection: The motion detection icon will display when motion has been detected. This setting must
- 24- Ref#90020326K0709 To use the snapshot function: 1.) Click on the snapshot button, and you will see the screen flicker black. 2.) In e
- 25- Ref#90020326K0709 3.) Once the folder has been selected the device will start to record. To stop recording click on the red icon and it w
- 26- Ref#90020326K0709 Camera Name: Select a camera name for the device and then hit submit Video Codec: Resolution: Resolution (MPEG4+MP
- 27- Ref#90020326K0709 Mirror: The mirror function allows you to flip the image of the device around. Depending the direction and the way the ca
- 28- Ref#90020326K0709 Tune Image The tune image settings section allows you to control and tune the picture quality of the image. Keep in min
- 29- Ref#90020326K0709 Network Network The network section allows you to setup the network information for the IP Kamera 9070IR. Enable DHCP
- 3- Ref#90020326K0709 Table of Content 1.) WELCOME ...
- 30- Ref#90020326K0709 FTP The FTP section of the IP Kamera 9070IR allows you to save video clips FTP Server: The FTP server address is where
- 31- Ref#90020326K0709 SMTP Server: Enter the SMTP Outgoing mail address Email Address: Enter the Receiving Email address Submit: After all setti
- 32- Ref#90020326K0709 IP Service IP service is a added service that provides you a platform so you do not remember a long IP Address. Just ent
- 33- Ref#90020326K0709 GAE Start: Will setup the device load information to the google cloud so that your device can be accessed on the cloud. Se
- 34- Ref#90020326K0709 RTSP Real Time Streaming Protocol (RTSP) gives the device another way to stream live video. Using programs that support RT
- 35- Ref#90020326K0709 Date and Time Set the date and Time of the device here. The Local Time: The local time corresponds to the current time
- 36- Ref#90020326K0709 User In this section, you can create different user access rights for different types of users. Authority: Select one
- 37- Ref#90020326K0709 The Beeper allows the device to make beeping sounds when there is no network connections. From here you can set the better
- 38- Ref#90020326K0709 Update The Update Firmware section is where information on the 9070IR is displayed. The Kernel Version, Uboot Versio
- 39- Ref#90020326K0709 4.) Please wait for the loading circle to finish, and wait for an update confirmation page. 5.) Once the device is u
- 4- Ref#90020326K0709 FTP ...
- 40- Ref#90020326K0709 Event Log In the Events Log section you can find the log for the IP Camera. This section will notify you any events th
- 41- Ref#90020326K0709 Setting Snapshot Path The snapshot path section allows you to configure where you would like your live snapshot and rec
- 42- Ref#90020326K0709 File Configuration: Under this section you can select a prefix name for your recorded files. Here you can also add a date
- 43- Ref#90020326K0709 SD Card The SD card section is where settings to setup the SD card recording is located. In this section you can confi
- 44- Ref#90020326K0709 SD Format: SD format will format the entire SD card Unmount: The feature will unmount the SD card from the device, so
- 45- Ref#90020326K0709 4.) Here you can select a user in your windows OS that you would like to share with or Everyone which will share this dr
- 46- Ref#90020326K0709 6.) Click the done button and it will take you back to the folders properties. Under the sharing tab you will find a sec
- 47- Ref#90020326K0709 2.) Next under Net Drive status click on the Connect button to make sure that the net drive has been setup correctl
- 48- Ref#90020326K0709 E-mail SMTP The SMTP application settings is where the file format uploaded by email can be selected. From here you c
- 49- Ref#90020326K0709 Start by selecting which method you would like to use EZ blog. There are two ways that you can use EZ blog. 1.) Using
- 5- Ref#90020326K0709 1.) Welcome Introduction Aviosys 9070IR is a great solution to add for HD IP surveillance. With resolution up to 1
- 50- Ref#90020326K0709 2.) Select the dimensions you would like the image to be 3.) Select the create code button to create the embed code 4.
- 51- Ref#90020326K0709 To use CNT to integrate your IP camera with your blog: 1.) After you have enabled the GAE feature, click on the copy bu
- 52- Ref#90020326K0709 My Web The My-Web functionality will make your IP Kamera more than just a surveillance tool. Now you can use it to prom
- 53- Ref#90020326K0709 How to use my WEB 1. Download sample. 2. Save the zip file to the location . 3. Press browse, and select the zip file
- 54- Ref#90020326K0709 RSS The RSS feature of the 9070IR-PoE will allow the user to be constantly informed about the device. Using RSS any s
- 55- Ref#90020326K0709 Schedule Record Schedule The schedule allows you to select days and times that you would like to schedule automatic rec
- 56- Ref#90020326K0709 Schedule Record – Upload Via FTP: Saves schedule recordings into FTP Schedule Record – Save into SD Card: Saves schedule
- 57- Ref#90020326K0709 5.) You can right click on the window screen for more options 6.) Once your settings have been set hit the submit but
- 58- Ref#90020326K0709 When motion is detected, the IP Kamera 9070IR will send files to E-mail. Recording Time: Set the duration of time you wo
- 59- Ref#90020326K0709 In these file folders you will see that your files are labeled by Year/Month/Day/Time. Also you may see some files that
- 6- Ref#90020326K0709 Minimum System Requirements CPU Minimum Requirements • Intel(R), Pentium(R), DUAL Core (D),CPU 3.0GHz or equivalent • Ope
- 60- Ref#90020326K0709 2.) Then select where you would like the file to be stored. View in Full Screen: To view the IP Kamera in full screen
- 61- Ref#90020326K0709 Snapshot Command: The snapshot command takes a snapshot of the camera in the current view. http://ipaddress:port/snapshot
- 62- Ref#90020326K0709 http://ipaddress:port/vb.htm?dnsip=dnsipaddress Ex. http command Hhttp://192.168.1.192/vb.htm?dnsip=168.95.1.1H MJPEG
- 63- Ref#90020326K0709 6.) Check the Cache value. For low latency, it should be 70~80 based on PC’s performance. Note: If the video is not
- 64- Ref#90020326K0709 10.) Type in the RTSP address of your device For Mpeg4 Stream1 : rtsp://<IP Address>/mpeg4 For Mpeg4 Stream2 : rtsp
- 65- Ref#90020326K0709 *Note: Make sure when typing in the MAC address to leave out the “:” Find MAC Address in WAN Using IPService on IP Edit
- 66- Ref#90020326K0709 Surf Pop Interface The Surf Pop Interface is a very easy to use and familiar in format. Very similar to many chat program
- 67- Ref#90020326K0709 The Surf Pop interface consists four major parts which consists of the following: Camera Display Area: The Camera display
- 68- Ref#90020326K0709 Once the update has been confirmed Surf Pop will automatically update the program itself How to setup Surf Pop Cameras On
- 69- Ref#90020326K0709 Removing a device To remove a device from Surf Pop all you need to do is go to the online cameras section and find the de
- 7- Ref#90020326K0709 Package Contents 9070IR-PoE Unit x 1 with sun cover 9070IR-PoE Installation CD AC Adaptor x 1 Camera Mounting Bracket
- 70- Ref#90020326K0709 3.) Then to see if the device was correctly setup, simply double click on the device in surf pop and a pop window will a
- 71- Ref#90020326K0709 Now it would be hard to scroll down the list finding the name of the camera you are looking for so simply use the device s
- 72- Ref#90020326K0709 Zooming into the image With surf pop you can also easily zoom into the pop windows that you are looking at. Simply just c
- 73- Ref#90020326K0709 2.) Then type in the name of the person, email and the message. 3.) Once a message has been set it will look like the
- 74- Ref#90020326K0709 10.) Frequently Asked Questions (F.A.Q) Q1: Why can’t I view the video files that I have recorded, nothing is playing? An
- 8- Ref#90020326K0709 4.) Setting up the device Hardware setup Setting up the device *Before setup the device make sure of the following: 1.) M
- 9- Ref#90020326K0709 Software Setup Software 1.) First place the Media Link-IP Family CD that came with your device into your CD/DVD Rom drive.
Kommentare zu diesen Handbüchern