Aviosys 9223K-D Bedienungsanleitung

- 1- Ref#9223KD0001 IP Power 9223K-D User Manual Release Date: 10/19/2012 Manual Version: 1.1 Firmware:4.01

- 10- Ref#9223KD0001 Note: Please remember that you use normally open or normally closed the output control will either create a open circuit

- 11- Ref#9223KD0001 1.) First connect the cables to the 9223K-D. Make sure that you have stripped enough of the cable so that the contacts can

- 12- Ref#9223KD0001 For example If the 9223K-D IP Address: 192.168.100.200 Port: 9223 On the router you will need to port forward the I

- 13- Ref#9223KD0001 2.) Open IPEdit and any device in the same network should automatically be detected and listed in the local devices sectio

- 14- Ref#9223KD0001 IP Service How to use IP Service on IPEdit: IP service allows the user to directly connect to his / her device through the

- 15- Ref#9223KD0001 6.) Web Interface Connecting to the 9223K-D After the device has been setup correct it is time to connect to the de

- 16- Ref#9223KD0001 GPIO Configuration Set I/O The Set I/O configuration is where most of the live power control is done. From this panel the u

- 17- Ref#9223KD0001 Define I/O Name Define I/O is the section that allows the user to define the device name, country, and city. As well as the

- 18- Ref#9223KD0001 Then if you would like to save it to memory you can push the memory button. This means if the device is set to default set

- 19- Ref#9223KD0001 DHCP: This will enable or disable the DHCP on the device Beeper: This will enable or disable the beep on the device Http Co

- 2- Ref#9223KD0001 Warning: Any changes made to this equipment without permission may cause damages to the device! IMPORTANT NOTICE 1. IP P

- 20- Ref#9223KD0001 DDNS Server IP: The DDNS server IP Your domain: Type in the dyndns domain name DDNS Username: Enter the DDNS username here

- 21- Ref#9223KD0001 Changing the password of the device: 1.) Type in the old password for the device 2.) Then type in the new password maxim

- 22- Ref#9223KD0001 Pin I/O On/Off: Select the action of choice, On or off For example: n If you would like to turn on the device at 8AM and

- 23- Ref#9223KD0001 Logout Click on the Logout link after you finish each session of using the IP Power 9223K-D. This will ensure that any other

- 24- Ref#9223KD0001 Set Power Command The Set Power command allows you to control the devices on/off through the http commands. With this comman

- 25- Ref#9223KD0001 RS232 Control RS232 Control is available to be added as an optional feature. This option, if required is available on a pro

- 26- Ref#9223KD0001 Q3: What can I do if I forget my password? Ans: In the login field enter the field 1.) “super user”: do not enter the quo

- 3- Ref#9223KD0001 Table of Content 1.) WELCOME ...

- 4- Ref#9223KD0001 E-MAIL ...

- 5- Ref#9223KD0001 1.) Welcome Introduction The 9223K-D is an industrial grade 4 port bare board relay perfect to power management through an

- 6- Ref#9223KD0001 Specification * Power Input : Support 2 styles - Green terminal Block or Black power jack

- 7- Ref#9223KD0001 Package Contents Package Contents 1.) 9223K-D x 1 2.) 9223K-D Installation CD Provide manual, software, and documentat

- 8- Ref#9223KD0001 3.) Interface Description Hardware Interface Power input Spec : 12VDC~24VDC ,1 Amp * Green terminal power line in. OR

- 9- Ref#9223KD0001 4.) Hardware Setup *Before setup the device make sure of the following: 1.) Make sure that all the package contents are al